Note: Our puller prices typically increase on January 1st, but an annual increase MAY occur at other times of the year if not on January 1st. Some years, especially with the pricing of parts, there may be no increase.
UPS/USPS rates normally increase around December 26th.
We accept Visa and MasterCard
Orders are normally shipped within 1 business day.
- If ordering any extra items with a puller, the shipping may be cheaper than what is calculated on the next page. If possible, we put the extra handles, etc. in the same box as the puller to save on shipping.
- If ordering smaller parts that fit in a 7" x 3.75" postage bag, we will mail the parts USPS to save on shipping, instead of shipping them via UPS which is calculated on the next page.
Checkout is currently unavailable due to technical difficulties. We're actively working to resolve the issue as quickly as possible. Thank you for your patience.
To place an order, please call us directly at 740/345-4528.
Puller Models with Cable
2-20
2 Ton More Power Puller® w/20' of 5/16" Cable
2-20-SLT
2 Ton More Power Puller® w/20' of 5/16" Cable and safety latches on all 3 hooks.
2-30
2 Ton More Power Puller® w/30' of 5/16" Cable
2-30-SLT
2 Ton More Power Puller® w/30' of 5/16" Cable and safety latches on all 3 hooks.
2-35
2 Ton More Power Puller® w/35' of 5/16" Cable
2-35-SLT
2 Ton More Power Puller® w/35' of 5/16" Cable and safety latches on all 3 hooks.
3-20
3 Ton More Power Puller® w/20' of 5/16" Cable
3-20-SLT
3 Ton More Power Puller® w/20' of 5/16" Cable and safety latches on all 3 hooks.
Puller Models with AmSteel®Blue
2-20-A-SLT
2 Ton More Power Puller® w/20' of 5/16" AmSteel-Blue Rope and safety latches on all 3 hooks.
3-35-A-SLT
3 Ton More Power Puller® w/35' of 5/16" AmSteel-Blue Rope and safety latches on all 3 hooks.
AmSteel®Blue Replacement Rope
A20-H1-SLT
20' of 5/16" AmSteel-Blue w/#H1 End Hook w/Safety Latch installed on rope (RF included, but not 100% installed)
A35-H1-SLT
35' of 5/16" AmSteel-Blue w/#H1 End Hook w/Safety Latch installed on rope (RF included, but not 100% installed) Note: This length of rope will only fit on the reel hubs that are 1 ½", not the older 2" hubs.
Parts - 2 Ton Model
CK
Cotter Key
H1
Hook (end of cable)
H1-SLT
Hook with safety latch (end of cable)
P1
Frame
P620
20' of 5/16" cable with rivet attachment (ready to apply to reel)
P620-H1
20' of 5/16" cable w/H1 end hook attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P620-H1-SLT
20' of 5/16 cable w/H1 end hook (w/safety latch) attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P630
30' of 5/16" cable with rivet attachment (ready to apply to reel)
P630-H1
30' of 5/16" cable w/H1 end hook attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P630-H1-SLT
30' of 5/16" cable w/H1 end hook (w/safety latch) attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P635
35' of 5/16" cable with rivet attachment (ready to apply to reel)
P635-H1
35' of 5/16" cable w/H1 end hook attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P635-H1-SLT
35' of 5/16" cable w/H1 end hook (w/safety latch) attached to cable with sleeve (#SL)(RF included, but not 100% installed)
P7
Tubular safety handle
P7-EXT
Safety handle extension (18" long w/red grip) (inserts into P7) – 2 ton unit. Note: Only fits handles 1989 and after.
P8
Tubular rivet for reel
P9
Rivet for pawl
P10-1
Shoulder rivet (attach yoke, 2 required)
READ THIS! This rivet fits older models from 1934 to some from 2013 and is flush to the yoke. Check your model before you order.
P10-2
Shoulder rivet (attach yoke, 2 required)
READ THIS! This rivet fits newer models beginning in 2012/2013 and extends 1/8" beyond the yoke. Check your model before you order.
P11
Spring for pawl on yoke or frame
P21
Spring – OLD 1 ½ ton Spring for pawl on yoke (Not 2 ton, just 1 ½ ton) (Pre 1981 pullers)
P13
Cable Clamp for 5/16 cable (2 required)
P14
Pawl
P15
Tackle block hook (includes P19 & SH)
P15-SLT
Tackle block hook with safety latch (includes P19 and SH)
P16
Yoke with 2 shoulder rivets
P19
Clevis pin (w/hitch pin) (attach SH to P15)
P22
Drag wave washer for reel.
R17
Reel
RF
Rivet and ferrule - cable to reel attachment
SH
Sheave
SL
Aluminum alloy sleeve (mfg. installed)
SLT-1
Safety latch (for H1 hook)
SLT-2
Safety latch (for P15 & W10 hooks)
W10
Frame hook (includes nut)
W10-SLT
Frame hook with safety latch (includes nut)
Parts - 3 Ton Model
(Parts same as 2 Ton except as noted below.)
P620
20' of 5/16" cable with rivet attachment (ready to apply to reel)
P620-H1
20' of 5/16" cable w/H1 end hook attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P620-H1-SLT
20' of 5/16" cable w/H1 end hook (w/safety latch) attached to cable with sleeve (#SL) (RF included, but not 100% installed)
P7-3
Tubular safety handle - 3 ton unit
P7-3-EXT
Safety handle extension (18" long w/blue grip) (inserts into P7-3) – 3 ton unit
P15-3
Tackle block hook (includes P19-3 & SH-3)
P15-3-SLT
Tackle block hook with safety latch (includes P19-3 and SH-3)
P19-3
Clevis pin (w/hitch pin) (attach SH-3 to P15-3)
SH-3
Sheave
Slings (extension cables w/loop on each end)
(Custom slings available by request.)
C05
5' sling made with 5/16" cable.
C10
10' sling made with 5/16" cable.
C25
25' sling made with 5/16" cable.
C50
50' sling made with 5/16" cable.
C100
100' sling made with 5/16" cable.